How to spray water-based wood finishes by general finishes _ general finishes

General Finishes water based products can be sprayed through compressed air, HVLP, airless or C.A.S. Easy mixed drinks with tequila units. Easy to make mixed drinks with tequila Surface Preparation: All surfaces should be clean and free from dirt and oil and sanded as per instructions above. Easy to make drinks with tequila We recommend Fuji HVLP Spray Systems for the furniture or wood finishing industry.

Click here for a guide on HVLP fluid spray tip sizes. Easy drinks to make with tequila Spray Application of General Finishes Water Based Finishes Using HVLP Spray Equipment

• Water Based PolyAcrylic is ready to spray from the container. What are the best drinks to order at a bar If necessary in hot or dry climates, reduce 10 to 20% with water or General Finishes Extender to extend the open time.

• Pre Sealing : Soft woods such as Pine and Aspen absorb stain at an uneven rate and may respond better to staining if the wood bas been pre-sealed.

The best drinks to order at a bar Natural stain can be applied to raw wood to condition the surface for uniform penetration of the stain. Best drinks to order at a bar for men Pre-sealing will cause the final stain to be lighter. Simple mixed drinks with vodka Always test your color on a hidden part of the furniture! Allow the Natural stain to dry 1 hour before applying your final stain color.

• If you are using a sprayer that has been used for oil based or lacquers, clean the unit thoroughly and rinse with warm water before using. Simple drinks to mix with vodka Apply a thin coat first that will dry and harden faster. Simple drinks to make with vodka Sand this first coat down to a smooth base on which to build your finish coats. Simple drinks made with vodka With water based finishes it is better to spray 2 thin coats rather than 1 heavy coat.

• Recommended Spray Tips for Wood Stains and Top Coats. Simple drinks made with rum Fluid tip sizes should be as follows: Compressed air – .040, HVLP – .051, Airless – .009. Simple mixed drinks with rum Recommended Tips for Milk Paint. Simple drinks to make with rum Compressed air – .050, HVLP – .072, Airless – .013. Best drinks made with vodka Air caps should be medium size. Easy drinks to make with rum Contact your supplier to verify proper tip sizes for your specific equipment.

• Always strain material through a medium to fine mesh filter before spraying.

• Reduction: If spraying the product as a stain in order to allow the grain to show through, reduce 10 to 20% with water or General Finishes Extender. Easy halloween drinks with vodka If spraying as a paint, do not reduce. Easy mixed drinks with rum For example, you may wish to spray Cranberry Red stain on for a painted look. Easy drinks to make with vodka In this instance, do not reduce. Best drinks to mix with rum It is generally not necessary to reduce Milk Paints. Best mixed drinks with vodka but they also may be reduced 10 to 20% with water or GF Extender.

• Practice makes perfect! If you have never sprayed finishes before, take a large piece of cardboard and practice your technique first. Easy drinks made with rum Spray water on the cardboard to learn how the gun works. Simple drinks with gin Check your fluid settings and adjust the controls to get comfortable with the spray angles and to develop your technique.

• Keep your gun at a 90* angle, 6-8″ from the surface. Simple drinks made with tequila On large flat areas, use wet, even patterns 6 to 8? wide. Simple drinks with amaretto Over lap each pass 25% to conceal lines.

• For narrow surfaces, reduce the fan pattern to 2-3″ to reduce overspray. Simple drinks to make Break your work into sections such as dresser top or drawer fronts. Simple drinks with whiskey Spraying too large of an area can result in a textured grainy surface. Best drinks with amaretto A correctly sprayed finish should appear even and glossy. Easy drinks with amaretto It is important to spray enough material to allow proper flow and leveling of the finish.

• Rough, dry surface. Easy drinks made with tequila This is called dry spray. Simple drinks made with gin You may have sprayed too lightly. Simple drinks to make with gin Re-sand the finish with #320 paper and apply a heavier coat. Simple mixed drinks with gin Keep your gun at 6-8″ from the surface.

• Dimples in the finish. Easy drinks with gin This is called orange peel, caused by spraying in temperatures that are too cool. Simple drinks to make at home Cooler temperatures will adversely affect how the finish will level and harden. Simple drinks to make with whiskey Water based finishes must be applied at temperatures above 65 F. Easy drinks with whiskey If it is cold enough to wear a sweater it is too cold to apply a water based finish. Simple mixed drinks with whiskey The surface of the wood must also be warm. Best drinks to mix with vodka If you turn the heat on when you enter your shop in the morning, the air heats up quickly but your furniture will still be cold for some time. Healthy drinks to mix with vodka Check the surface to see if it is warm. Dry vermouth cocktails Also, check the temperature of the finish. Sweet vermouth cocktails Warming cold finish by setting the can next to a heater or setting the container in some hot water for 5 minutes will improve the ease of application. Cocktails with vermouth Note: Larger dimples are called “fish-eyes” or “craters”. Cocktails with sweet vermouth Cool temperatures can cause these, but the more likely source is contamination of the finish with either wax or silicone

• Blush. Cocktails with dry vermouth Blush, the term for a cloudy, milky appearance in the finish, has two causes. Red vermouth cocktails The most common reason is incompatible stain. White vermouth cocktails For example, using a water based top coat over a heavy oil based stain. Martini vermouth cocktails When the top coat is applied, the oil in the stain seeps up through the finish and reacts with the acrylic causing a chemical blush. Vermouth rosso cocktails To prevent this, use a quick drying water based stain. Simple vermouth cocktails If you choose to use oil based stain, seal the stain with a coat of shellac or lacquer sealer. Cocktails with red vermouth This will provide a barrier between the oil and the acrylic. Bourbon and vermouth cocktails Proper drying time between the oil stain and finish coats is essential! The other cause for blushing is high humidity. Vermouth based cocktails Spraying water based finish in humidities of over 75% may cause blushing because moisture becomes trapped beneath the finish and cannot evaporate. Vermouth bianco cocktails You can prevent this condition by increasing air movement in the finishing area with a fan. Cocktails using vermouth All water needs to evaporate is sufficient air movement. Classic vermouth cocktails You can also improve drying conditions by increasing the temperature in the drying area.

• Surface is not leveling out. Rosso vermouth cocktails In hot temperatures (85F ? 100F) the finish may dry too fast. Best vermouth cocktails Use General Finishes Extender to open (increase) the dry time. Dolin blanc vermouth cocktails Finishes that dry too fast may not completely level out before all the water evaporates from the finish.

Note: High humidity can cause the finishes to take longer to dry but will not harm the final finish.

Leave a Reply

Your email address will not be published. Required fields are marked *